PC/ABS 910-45

Hits:  UpdateTime:2018-06-08 15:57:29  【Printing】  【Close
PC/ABS alloy,PC/ABS 910-45
 
Material properties
Injection grade PC/ABS alloy, good fluidity and impact strength, electroplating. Used in the manufacture of mobile phone case, daily necessities and automobile parts.
(Properties)
(Test Method)
(Test Condition)
(Unit)
910-45
Tensile Strength
ASTM D638
1/8”, 6 mm/min
MPa
48
Tensile Elongation
ASTM D638
1/8”, 6 mm/min
%
>50
Flexural Strength
ASTM D790
1/4”, 2.8 mm/min
MPa
80
Flexural Modulus
ASTM D790
1/4”, 2.8 mm/min
MPa
2100
Izod Impact Strength
ASTM D256(Notched)
1/8”, 23℃
J/m
450
Melt Flow Index
ASTM D1238
260℃, 5 kgf
g/10min
20
Heat Distortion Temp
Unannealed
ASTM D648
1/4”, 120℃/hr
1.82MPa
95
Flammability
UL 94
-
-
1/16”HB
1/8”HB
The above data only represent general data and do not represent the specification value of each product.
 
Recommended processing conditions
(Processing Parameters)
(Typical Value)
(Unit)
(Remark)
Melt Temp. Range
240-290

Melt Temp.Optimum
250-280

 Mold Temp. Range
70-90

 Drying Temperture
95-105

 Drying Time
3-4
hrs

 Moisture Content
≤0.04
%


Copyright © 2018 Dongguan Sinochem Huamei Plastic Co., Ltd. All Rights Reserved. ICP备案许可证: 粤ICP备18035007号-1

Technical support:Dongguan Website ConstructionDongDian

Share: