Light diffusion PC,PC 760-LD110

Hits:  UpdateTime:2018-06-08 15:26:57  【Printing】  【Close

Optical diffusion PC resin,PC 760-LD110 

Material propertiesSpecial Properties:

Light diffusion stagePCResin, high transmittance, high mobility.Good flow, high light transmission, light diffuser grade Polycarbonate resin.

(Properties)

(Test Method)

(Test Condition)

(Unit)

760-LD110

Tensile Strength

ASTM D638

1/8”, 6 mm/min

MPa

64

Tensile Elongation

ASTM D638

1/8”, 6 mm/min

MPa

>50

Izod Impact Strength

ASTM D256 (Notched)

1/8”, 23℃

J/m

150

Density

ASTM D972

23

g/cm3

1.2

Melt Flow Index

ASTM D1238

300, 1.2kgf

g/10min

15

Total Transmission

DIN EN ISO 13468

1 mm

%

82

HAZE

ISO 13468

1 mm

%

99

Heat Distortion Temp

Unannealed

ASTM D648

1/4”, 120℃/hr

1.82MPa

128

Flammability

UL 94

-

-

1/16”HB

1/8”HB

The above data only represent general data and do not represent the specification value of each product.

 

applicationTypical Applications:

Lamp shade, control button, etc.

Lamp cover, control and operating elements.

 

The processing technologyProcessing

Injection molding, material temperature280-320 °C,Mold temperature80 - 100 °C,Use after drying.

Injection moulding (Temp. of mass: 280 -320 °C, Temp. of mould: 80 - 100 °C), appropriate pre-drying necessary.

 


Copyright © 2018 Dongguan Sinochem Huamei Plastic Co., Ltd. All Rights Reserved. ICP备案许可证: 粤ICP备18035007号-1

Technical support:Dongguan Website ConstructionDongDian

Share: