PC/ABS 910-65

Hits:  UpdateTime:2018-06-08 15:21:21  【Printing】  【Close
PC/ABSalloy,PC/ABS 910-65
 
Material properties
High strength, high heat resistance PC/ABS alloy for mobile phone case, thin wall products and automobile parts.
(Properties)
(Test Method)
(Test Condition)
(Unit)
910-65
Tensile Strength
ASTM D638
1/8”, 6 mm/min
MPa
54
Tensile Elongation
ASTM D638
1/8”, 6 mm/min
%
85
Flexural Strength
ASTM D790
1/4”, 2.8 mm/min
MPa
80
Flexural Modulus
ASTM D790
1/4”, 2.8 mm/min
MPa
2300
Izod Impact Strength
ASTM D256(Notched)
1/8”, 23℃
J/m
550
Melt Flow Index
ASTM D1238
260℃, 3.8 kgf
g/10min
13
Heat Distortion Temp
Unannealed
ASTM D648
1/4”, 120℃/hr
1.82MPa
106
Flammability
UL 94
-
-
1/16”HB
1/8”HB
The above data only represent general data and do not represent the specification value of each product.
 
Recommended processing conditions
(Processing Parameters)
(Typical Value)
(Unit)
(Remark)
Melt Temp. Range
250-290

Melt Temp.Optimum
230-280

Mold Temp. Range
60-80

 Drying Temperture
100-110

 Drying Time
3-4
hrs

 Moisture Content
≤0.04
%


Copyright © 2018 Dongguan Sinochem Huamei Plastic Co., Ltd. All Rights Reserved. ICP备案许可证: 粤ICP备18035007号-1

Technical support:Dongguan Website ConstructionDongDian

Share: